Highlights:

• Innovative optics and a swivel head provide perfect path illumination
• 2 energy modes: Energy Saving for long runs and Constant Current for constant light
• Highly resistant to dust and water per IP57
• Backup mode: Over 1 hour of battery life remaining after the first low battery warning to keep you from suddenly being stranded in the dark
• 360° visibility: Red blinking rear light and reflective headband

Description

Running at night or in the dark requires effort. Ledlenser's NEO4 gives you everything you need to get out and do it. The unbeatable bang for the buck, the light weight and a first-class design make a very good argument to put on your running shoes and finally get going. Discover the virtually non-glare optics and the swivel-mounted headlamp, which light the way perfectly. And don't forget the Constant Current Mode, which provides constant illumination all the way to the end of your run.

Technical data

LED

Power supply

Case

Scope of delivery

• 1 set of batteries (AAA)

Features and technologies

Smart Light Technology

The smart light technology allows you to easily program your individual range of functions through different button and switch combinations.

Wide Beam

The Wide Beam technology makes things twice as safe: not only allowing you to see more, but also to be seen from every angle.

Rear Light

A red rear light on the battery serves as a signaling device so that you can also be reliably seen from behind – e.g. in road traffic or on construction sites, increasing ones safety.

Transportation Lock

The optionally activatable lock function prevents accidental switching on of the light in the backpack or suitcase.

Temperature Control System

Temperature Control protects you from burns and the LED from overheating.

Measured values according to ANSI/PLATO FL 1 in the respective setting named. If no setting is specifically named, the luminous flux (lumens/lm) and range (meters/m) values refer to the brightest setting and the burn time (hours/h) values refer to the lowest setting. A boost function (if available) can be used several times, but is only available for a short time at a time. In case the lamp is equipped with colored LED(s), the measured values are given with white light or the white LED. If the lamp has different energy modes, the "energy saving mode" is the basis for the measurement.